Pear Lab-Grown Diamond Wedding Band | Spiked Pear Eternity

Specifications

• Piece: Finished wedding band — no center stone, nothing to configure
• Diamonds: 1.12ct total, 15 pear-cut lab-grown diamonds
• Stone layout: Pears alternating point-up and point-down all the way round
• Setting: claw-set between gold spikes, each pear turned against its neighbor so the band's edges read as a row of points
• Metal: 10K, 14K & 18K solid gold and platinum
• Band width: 4mm, spiked outer edge
• Certification: Matched to D–H color and VVS2–SI1 clarity; certified as a set
• Ring sizes: US 3–10, including half sizes
• Made to order: 7-day production, then shipping

Fifteen pear-cut diamonds, every one facing the opposite way to the stone beside it, and the gold between them drawn up into sharp points. The result is a band with a jagged silhouette — a crown, more or less — where most eternity bands aim for a smooth line. It is the loudest ring in this collection and it does not pretend otherwise.

The band

Alternating the pears is what creates the spikes: where two points meet, the claw that holds them is drawn up and finished as a peak, and where two bellies meet, the gold stays low. So the outline of the band is a rhythm of high and low all the way round. At 1.12 carats across fifteen stones the pears are large enough to read individually rather than as pave. There is no back section — the pattern runs the full circumference.

About our lab-grown diamonds

Every stone in this band is a lab-grown diamond — the same carbon crystal structure, hardness and optical behavior as a mined diamond, grown rather than extracted. The stones are matched to one another for color and clarity across the whole ring and certified as a set rather than individually, which is standard for calibrated stones of this size.

About the photographs

The photographs on this page show this band as it is made. Because it is a fixed design rather than a setting built around a stone you choose, the ring you receive matches them closely. We photograph every finished ring and send you those images before it ships.

Common questions

Do the points catch on things?
They are finished rounded rather than needle-sharp, so they do not snag woven fabric. Loose knitwear and hair are a different matter — this is a statement band rather than one to wear while pulling on a sweater. If that concerns you, say so and we can lower the peaks slightly at the bench.

Can it be resized?
Barely — perhaps a quarter size. Diamonds run the full circumference with no plain section to work in, and the spike rhythm has to stay even, so resizing means remaking a section. Get the size right at the order stage; we will send a free plastic sizer if you ask.

Do the photographs show the exact ring I will receive?
Very nearly. This is a finished band made to a fixed specification, not a setting built around a stone you choose, so the ring in these photographs and the ring you receive are the same design at the same weight. We photograph every finished ring and send you those images before it ships.

Are the diamonds certified?
As a set, yes. Calibrated stones of this size are not individually certified — nobody grades a 0.10ct melee stone on its own paper — so we supply a certificate covering the total carat weight and the matched color and clarity range for the whole band.